Latex·ite^® 1Gallon (or 1QT.) 2X Crack Filler
is a specially formulated Acrylic Latex Rubber … Vinyl Polymer Blend that provides extended life & greater durability than ordinary cold pour formula crack fillers. Our fast dry additive accelerates drying & curing time. For blacktop cracks up to 1/2″ wide.

• Premium filler for cracks up to 1/2″ wide.
• Fortified with latex and asphalt binders to strengthen bond.
• Just clean crack, shake, snip open and squeeze into crack.
• Low VOC Formula / Easy soap & water clean-up.

*Note: Product dries black…is brown only in liquid form.

(*Bottle color may vary)

Dalton Coatings Blacktop Crack Filler is a rubberized and fortified contractor grade formula.  It will fill small cracks up to 1/2″ with a pliable bead of liquid sealant. Just pour or squeeze filler into cracks. Sets up in two hours.

Crack-Stix^® 250ft. SMALL 1/4″ or 125ft. MEDIUM 1/2″ Black Permanent Asphalt Crack Fillers are the only PERMANENT solution to cracks on the marketplace. It is the same product seen on highways and roads but the only difference is YOU CAN APPLY IT and don’t need a 200 gallon melter to do it!

Crack-Stix^® are furnished as a black or gray (NEW!) solid “rope” in 1/2″ or 1/4″ thickness (Gray offered only in 1/2″ currently). It is an elastomeric, self-leveling sealant, which liquefies quickly and can be used in both asphalt and concrete pavements. When properly applied, it combines tenacious adhesive power with extraordinary resiliency to protect against the infiltration of moisture or incompressible through repeated thermal cycles of expansion and contraction.

Crack-Stix^® exhibit superior low temperature ductility, weather resistance, low oxidation breakdown and is non-tracking. It is the only sealant available which is designed to be inserted into the crack or joint cavity first and then melted with direct heat process. The modifier system contained in Latex·ite^® Crack-Stix^® allows the material to withstand direct heat without experiencing degradation.

(Note: Pli-Stix and Crack-Stix^® are the same product offered in black or gray:

Pli-Stix comes in 30ft MEDIUM 1/2″ or 60ft SMALL 1/4″
Crack-Stix^® comes in longer rolls: 75ft MEDIUM 1/2″, 125ft MEDIUM 1/2″ AND 250ft SMALL 1/4″)

• No VOC’s
• Prevent slip, trip and fall accidents
• Ready to use immediately, melt-away wrapper!
• Save time and purchase either our CSX-900 Cane Torch extender our really speed up application with our NEW walk behind CSX-1000 PRO MELT TORCH!
• TIP: If you are not using our recommended torch and are using just a handheld torch it can be difficult to keep the torch upright (or it may flame out)…so you may want to find BURNER WAND which will keep the flame running!
• For deep cracks or joints, before you begin fill the crack using backer rod, sand or stone dust but leave enough room for product.
• You can use a larger 20lb propane tank to apply but you will need an attachment

Crack-Stix^® 225ft. SMALL 1/4″ or 125ft. MEDIUM 1/2″ Gray Permanent Asphalt Crack Fillers are furnished as a gray solid “rope” in 1/2” or 1/4″ thickness. It is an elastomeric, self-leveling sealant, which liquefies quickly and can be used in concrete and asphalt pavements. When properly applied, it combines tenacious adhesive power with extraordinary resiliency to protect against the infiltration of moisture or incompressibles through repeated thermal cycles of expansion and contraction.

Crack-Stix^® exhibit superior low temperature ductility, weather resistance, low oxidation breakdown and is non-tracking. It is the only sealant available which is designed to be inserted into the crack or joint cavity first and then melted with direct heat process. The patented modifier system contained in Crack-Stix^® allows the material to withstand direct heat without experiencing degradation.

We are pleased to introduce the GRAY version of Crack-Stix^® Permanent Concrete Crack Filler. This product, like it’s black version Crack-Stix^® that has been available since 1999, is the same, hot applied, patented, permanent joint and crack filler. After many requests for gray to fill concrete or faded blacktop…here it is and you don’t need a 200 gallon melter to apply it!

• For Concrete (or faded blacktop) Joints & Cracks 1/2″ – 1″ (12.7 – 25.4mm)
• Meets/exceeds requirements of ASTM C920-11 Standard Specifications for Elastomeric Joint Sealant
• Paintable: With either: Latex paint, masonry waterproofing paint or 2 component high solids epoxy
• T1 Usage for pedestrian and vehicular traffic areas
• Hot applied, gray, “rope-like” filler bonds to sidewalls. (Stretch or splice for narrow cracks, double over for larger cracks).
• TRAFFIC READY IN 20 MINUTES
• Prevent slip, trip and fall accidents
• Chlorine resistant – great for pool deck concrete joints
• NO VOC’S
• If concrete is cold we recommend pre-warming
• Ready to use immediately, melt-away wrapper!
• Save time and purchase either our CSX-900 Cane Torch extender our really speed up application with our NEW walk behind CSX-1000 PRO MELT TORCH!
• TIP: If you are not using our recommended torch and are using just a handheld torch it can be difficult to keep the torch upright (or it may flame out)…so you may want to find BURNER WAND which will keep the flame running!
• For deep cracks or joints, before you begin fill the crack using backer rod, sand or stone dust but leave enough room for product

25 lb. DIRECT FIRE – Black Hot Pour Joint Sealant

Sold in pallet quantities, 24 or 48 blocks per pallet.

Crack Rite DIRECT FIRE-BLACK is a superior quality, hot-applied crack and joint sealant that is will work on either concrete or asphalt. It consists of a special blend of resins, thermoplastic polymer rubber and stabilizers. DIRECT FIRE-BLACK can be heated in direct fired or single walled melted kettles. Will not track or bleed.

• Same performance as black DF
• Works on concrete AND faded asphalt
• Apply using MA-10 Melter
• Each 50lb. box covers approximately 250 lineal feet of ½’x ½” crack or joint
• Great option for customers who don’t want the black contrast on oxidized blacktop
• Meets / exceeds ASTM C920-11 Standard Specification for elastomeric sealants, Type S, T1 for pedestrians and vehicular traffic. It is paintable for line paint with Acrylic, latex or epoxy coatings

50lb. DIRECT FIRE – Gray Hot Pour Joint Sealant

Crack Rite DIRECT FIRE-Gray is a superior quality, hot-applied crack and joint sealant that is will work on either concrete or asphalt. It consists of a special blend of resins, thermoplastic polymer rubber and stabilizers. DIRECT FIRE-GRAY can be heated in direct fired or single walled melted kettles. Will not track or bleed.

JOINT SEAL DOESN’T NEED TO BE BLACK! 

• Same performance as black DF
• Works on concrete AND faded asphalt
• Great option for customers who don’t want the black contrast on their faded blacktop lot
• Dimensions:  Box 11.5″L x 11.5″W x 12.25″H, Pallet 36″L x 48″W x 40″H
• Sold in pallet quantities, 18 or 36 boxes per pallet.
• Each 50lb. box covers approximately 250 lineal feet of ½’x ½” crack or joint
• Great option for customers who don’t want the black contrast on oxidized blacktop
• Meets / exceeds ASTM C920-11 Standard Specification for elastomeric sealants, Type S, T1 for pedestrians and vehicular traffic. It is paintable for line paint with Acrylic, latex or epoxy coatings