Crack-Stix® Gray Permanent Asphalt Crack Filler
$1,950.00 – $4,200.00Crack-Stix® 225ft. SMALL 1/4″ or 125ft. MEDIUM 1/2″ Gray Permanent Asphalt Crack Fillers are furnished as a gray solid “rope” in 1/2” or 1/4″ thickness. It is an elastomeric, self-leveling sealant, which liquefies quickly and can be used in concrete and asphalt pavements. When properly applied, it combines tenacious adhesive power with extraordinary resiliency to protect against the infiltration of moisture or incompressibles through repeated thermal cycles of expansion and contraction.
Crack-Stix® exhibit superior low temperature ductility, weather resistance, low oxidation breakdown and is non-tracking. It is the only sealant available which is designed to be inserted into the crack or joint cavity first and then melted with direct heat process. The patented modifier system contained in Crack-Stix® allows the material to withstand direct heat without experiencing degradation.
We are pleased to introduce the GRAY version of Crack-Stix® Permanent Concrete Crack Filler. This product, like it’s black version Crack-Stix® that has been available since 1999, is the same, hot applied, patented, permanent joint and crack filler. After many requests for gray to fill concrete or faded blacktop…here it is and you don’t need a 200 gallon melter to apply it!
- For Concrete (or faded blacktop) Joints & Cracks 1/2″ – 1″ (12.7 – 25.4mm)
- Meets/exceeds requirements of ASTM C920-11 Standard Specifications for Elastomeric Joint Sealant
- Paintable: With either: Latex paint, masonry waterproofing paint or 2 component high solids epoxy
- T1 Usage for pedestrian and vehicular traffic areas
- Hot applied, gray, “rope-like” filler bonds to sidewalls. (Stretch or splice for narrow cracks, double over for larger cracks).
- TRAFFIC READY IN 20 MINUTES
- Prevent slip, trip and fall accidents
- Chlorine resistant – great for pool deck concrete joints
- NO VOC’S
- If concrete is cold we recommend pre-warming
- Ready to use immediately, melt-away wrapper!
- Save time and purchase either our CSX-900 Cane Torch extender our really speed up application with our NEW walk behind CSX-1000 PRO MELT TORCH!
- TIP: If you are not using our recommended torch and are using just a handheld torch it can be difficult to keep the torch upright (or it may flame out)…so you may want to find BURNER WAND which will keep the flame running!
- For deep cracks or joints, before you begin fill the crack using backer rod, sand or stone dust but leave enough room for product
D-Gel Asphalt Emulsion Additive
$1,350.00 – $2,700.00A unique, silicone fortified, latex additive for asphalt sealer. Promotes faster drying and curing, stops tracking, sand roll out and filter/tip clogging. Improves sand suspension. Suggested mix ratio: Add 2 gallons of D-GEL to 100-150 gallons of concentrated seal: Add water and sand per manufacturer’s recommendation
Direct Fire Black-25lbs block
$684.00 – $1,368.0025 lb. DIRECT FIRE – Black Hot Pour Joint Sealant
Sold in pallet quantities, 24 or 48 blocks per pallet.
Crack Rite DIRECT FIRE-BLACK is a superior quality, hot-applied crack and joint sealant that is will work on either concrete or asphalt. It consists of a special blend of resins, thermoplastic polymer rubber and stabilizers. DIRECT FIRE-BLACK can be heated in direct fired or single walled melted kettles. Will not track or bleed.
- Same performance as black DF
- Works on concrete AND faded asphalt
- Apply using MA-10 Melter
- Each 50lb. box covers approximately 250 lineal feet of ½’x ½” crack or joint
- Great option for customers who don’t want the black contrast on oxidized blacktop
- Meets / exceeds ASTM C920-11 Standard Specification for elastomeric sealants, Type S, T1 for pedestrians and vehicular traffic. It is paintable for line paint with Acrylic, latex or epoxy coatings
Direct Fire Black-50 lbs. Box
$990.00 – $1,980.0050lb. DIRECT FIRE – Black Hot Pour Joint Sealant
Dimensions: Box 11.5″L x 11.5″W x 12.25″H, Pallet 36″L x 48″W x 40″H
Sold in pallet quantities, 18 or 36 boxes per pallet.
Crack Rite DIRECT FIRE-BLACK is a superior quality, hot-applied crack and joint sealant that is will work on either concrete or asphalt. It consists of a special blend of resins, thermoplastic polymer rubber and stabilizers. DIRECT FIRE-BLACK can be heated in direct fired or single walled melted kettles. Will not track or bleed.
- Same performance as black DF
- Works on concrete AND faded asphalt
- Apply using MA-10 Melter
- Each 50lb. box covers approximately 250 lineal feet of ½’x ½” crack or joint
- Great option for customers who don’t want the black contrast on oxidized blacktop
- Meets / exceeds ASTM C920-11 Standard Specification for elastomeric sealants, Type S, T1 for pedestrians and vehicular traffic. It is paintable for line paint with Acrylic, latex or epoxy coatings
Direct Fire Gray
$684.00 – $1,368.0025 lb. DIRECT FIRE – Black Hot Pour Joint Sealant
Sold in pallet quantities, 24 or 48 blocks per pallet.
Crack Rite DIRECT FIRE-BLACK is a superior quality, hot-applied crack and joint sealant that is will work on either concrete or asphalt. It consists of a special blend of resins, thermoplastic polymer rubber and stabilizers. DIRECT FIRE-BLACK can be heated in direct fired or single walled melted kettles. Will not track or bleed.
- Same performance as black DF
- Works on concrete AND faded asphalt
- Apply using MA-10 Melter
- Each 50lb. box covers approximately 250 lineal feet of ½’x ½” crack or joint
- Great option for customers who don’t want the black contrast on oxidized blacktop
- Meets / exceeds ASTM C920-11 Standard Specification for elastomeric sealants, Type S, T1 for pedestrians and vehicular traffic. It is paintable for line paint with Acrylic, latex or epoxy coatings
Direct Fire Gray-50 lbs. Box
$1,944.00 – $3,888.0050lb. DIRECT FIRE – Gray Hot Pour Joint Sealant
Crack Rite DIRECT FIRE-Gray is a superior quality, hot-applied crack and joint sealant that is will work on either concrete or asphalt. It consists of a special blend of resins, thermoplastic polymer rubber and stabilizers. DIRECT FIRE-GRAY can be heated in direct fired or single walled melted kettles. Will not track or bleed.
JOINT SEAL DOESN’T NEED TO BE BLACK!
- Same performance as black DF
- Works on concrete AND faded asphalt
- Great option for customers who don’t want the black contrast on their faded blacktop lot
- Dimensions: Box 11.5″L x 11.5″W x 12.25″H, Pallet 36″L x 48″W x 40″H
- Sold in pallet quantities, 18 or 36 boxes per pallet.
- Each 50lb. box covers approximately 250 lineal feet of ½’x ½” crack or joint
- Great option for customers who don’t want the black contrast on oxidized blacktop
- Meets / exceeds ASTM C920-11 Standard Specification for elastomeric sealants, Type S, T1 for pedestrians and vehicular traffic. It is paintable for line paint with Acrylic, latex or epoxy coatings
Gator Patch
$2,340.00Gator Patch™ is a blend of asphaltic emulsion, mineral fillers, glass fiber, ground rubber and plasticizer designed for alligatoring skin patch areas. It is also used for filling cracks in excess of 1/2” width on all asphalt surfaces.
Ice and Snow Melt / Pet Friendly
$274.50 – $549.00Ice and Snow Melt is a 5 star rated, high performance ice and snow melt blend that is safer for kids, pets, and shrubs and acts quickly at lower temperatures. It is packaged in 30lb pails, 40lb pails and 40lb bags. Latex-ite Ice and Snow melt’s crystal flakes work quicker as it contains a fast-acting De-Icer agent. No powdery residue so you don’t have to worry about tracking. Organic tint added which gives you better coverage. If you have a large area you can use a Scott’s fertilizer spreader to apply: a setting of between 10-12 on the Scotts Dial should work. Remember, Latex-ite Ice and Snow Melt should not be used on old or structurally poor concrete. It should not be used on concrete that is less than 1 year old. Keep treated slush away from plants and vegetation as best as possible. Keep product in a dry place when not in use.
- Professional results for parking lots, driveways, sidewalks
- Melt point as low as -18°F (-27°C)
- Crystal flakes work quicker with fast-acting deicer
- No powdery residue, no inside tracking
- No harmful chemicals – safer for pets, kids and shrubs
- Contains anti-corrosive agent
- 30 lb. or 40 lb. pail with re-sealable lid and easy carry handle…we also offer 40 lb. bags
- For large areas you can use a Scott’s Fertilizer Spreader to apply (dial set to between 10 & 12)
Latex·ite Super Patch®
$355.20 – $710.40Latex·ite Super Patch® is a stone asphalt patch for driveways and pavements. It is recommended for POTHOLES, large cracks and joints. It can be used on both asphalt and concrete and is designed to be used year-round. Super Patch® (1 gal. & 3.5 gal.) contains asphalastic binders which give it maximum adhesion and longer life.
- 1 gallon & 3.5 gallons
- Black, stone aggregate formula.
- For pothholes, joints and large cracks.
- Contains asphalastic binders for maximum adhesion to sidewalls.
- Just pour and tamp … traffic ready immediately.
- Year-round formula.
- New low VOC formula ( <.1%) complies with all State & Federal Air Regulations.
PL100 Parking Lot Sealant
$720.00 – $1,440.00PARKING LOT SEALANT
CRACK-RITE™ PL-100 is an economical, single component hot applied crack and joint sealing compound. PL-100 is our hardest rubber offered, with the highest content of crumb rubber for anti-sag properties. PL-100 is ideal for melters with wands. Not recommended for pour pot applications
- 50lbs. (2-25lb. cubes)
PLUSHTEX Fortified Leveling Compound
$720.00 – $1,600.00Just stir and trowel or squeegee on this smooth, black, cement-like mix over depressions, deteriorated asphalt, medium sized cracks & ruts. Fortified with rubber for extra strength and elasticity. Ready to use.
Recreational Coatings
$1,800.00 – $3,900.00HIGH SOLID, HEAVILY PIGMENTED ACRYLIC CONCENTRATE
All purpose color, high solid acrylic latex concentrate. It is fortified with fine mineral fillers and acrylic resins. Color-fast pigments with an advance latex produce a richer, better yielding, longer lasting, in-depth color. Available stocked concentrate colors: Tournament Blue, Tournament Green, Dark Green, Light Green, Blue, Light Blue, Red, Gray, Beige, Brown. Custom colors available and speed specifications sent with order (i.e. medium-slow, medium, medium-fast). ITF Rated.
Tanker Load XL-1000® AE NO SAND
$12,000.00Our XL-1000® Asphalt Emulsion Sealer is a rubberized, high performance pavement sealer. XL-1000 AE provides exceptional coverage, durability and color stability and dries a satin black finish. Coverage rate: 30 to 40 square feet per gallon for two coats.
Tanker Load XL-1000® AE SAND
$12,000.00Our XL-1000® Asphalt Emulsion Sealer is a rubberized, pre-mixed, sand fortified high performance pavement sealer. XL-1000 AE provides exceptional coverage, durability and color stability and dries a satin black finish. Coverage rate: 30 to 40 square feet per gallon for two coats.