1 gal. 2X Premium Blacktop Crack Filler

Crack-Stix^® 250ft. SMALL 1/4″ or 125ft. MEDIUM 1/2″ Black Permanent Asphalt Crack Fillers are the only PERMANENT solution to cracks on the marketplace. It is the same product seen on highways and roads but the only difference is YOU CAN APPLY IT and don’t need a 200 gallon melter to do it! Crack-Stix^® are furnished as a black or gray (NEW!) solid “rope” in 1/2″ or 1/4″ thickness (Gray offered only in 1/2″ currently). It is an elastomeric, self-leveling sealant, which liquefies quickly and can be used in both asphalt and concrete pavements. When properly applied, it combines tenacious adhesive power with extraordinary resiliency to protect against the infiltration of moisture or incompressible through repeated thermal cycles of expansion and contraction. Crack-Stix^® exhibit superior low temperature ductility, weather resistance, low oxidation breakdown and is non-tracking. It is the only sealant available which is designed to be inserted into the crack or joint cavity first and then melted with direct heat process. The modifier system contained in Latex·ite^® Crack-Stix^® allows the material to withstand direct heat without experiencing degradation. (Note: Pli-Stix and Crack-Stix^® are the same product offered in black or gray: Pli-Stix comes in 30ft MEDIUM 1/2″ or 60ft SMALL 1/4″ Crack-Stix^® comes in longer rolls: 75ft MEDIUM 1/2″, 125ft MEDIUM 1/2″ AND 250ft SMALL 1/4″)

• No VOC’s
• Prevent slip, trip and fall accidents
• Ready to use immediately, melt-away wrapper!
• Save time and purchase either our CSX-900 Cane Torch extender our really speed up application with our NEW walk behind CSX-1000 PRO MELT TORCH!
• TIP: If you are not using our recommended torch and are using just a handheld torch it can be difficult to keep the torch upright (or it may flame out)…so you may want to find BURNER WAND which will keep the flame running!
• For deep cracks or joints, before you begin fill the crack using backer rod, sand or stone dust but leave enough room for product.
• You can use a larger 20lb propane tank to apply but you will need an attachment

25 lb. DIRECT FIRE – Black Hot Pour Joint Sealant Sold in pallet quantities, 24 or 48 blocks per pallet. Crack Rite DIRECT FIRE-BLACK is a superior quality, hot-applied crack and joint sealant that is will work on either concrete or asphalt. It consists of a special blend of resins, thermoplastic polymer rubber and stabilizers. DIRECT FIRE-BLACK can be heated in direct fired or single walled melted kettles. Will not track or bleed.

• Same performance as black DF
• Works on concrete AND faded asphalt
• Apply using MA-10 Melter
• Each 50lb. box covers approximately 250 lineal feet of ½’x ½” crack or joint
• Great option for customers who don’t want the black contrast on oxidized blacktop
• Meets / exceeds ASTM C920-11 Standard Specification for elastomeric sealants, Type S, T1 for pedestrians and vehicular traffic. It is paintable for line paint with Acrylic, latex or epoxy coatings

50lb. DIRECT FIRE – Gray Hot Pour Joint Sealant Crack Rite DIRECT FIRE-Gray is a superior quality, hot-applied crack and joint sealant that is will work on either concrete or asphalt. It consists of a special blend of resins, thermoplastic polymer rubber and stabilizers. DIRECT FIRE-GRAY can be heated in direct fired or single walled melted kettles. Will not track or bleed. JOINT SEAL DOESN’T NEED TO BE BLACK! 

• Same performance as black DF
• Works on concrete AND faded asphalt
• Great option for customers who don’t want the black contrast on their faded blacktop lot
• Dimensions:  Box 11.5″L x 11.5″W x 12.25″H, Pallet 36″L x 48″W x 40″H
• Sold in pallet quantities, 18 or 36 boxes per pallet.
• Each 50lb. box covers approximately 250 lineal feet of ½’x ½” crack or joint
• Great option for customers who don’t want the black contrast on oxidized blacktop
• Meets / exceeds ASTM C920-11 Standard Specification for elastomeric sealants, Type S, T1 for pedestrians and vehicular traffic. It is paintable for line paint with Acrylic, latex or epoxy coatings

PARKING LOT SEALANT 

CRACK-RITE™ PL-100 is an economical, single component hot applied crack and joint sealing compound. PL-100 is our hardest rubber offered, with the highest content of crumb rubber for anti-sag properties. PL-100 is ideal for melters with wands. Not recommended for pour pot applications

• 50lbs. (2-25lb. cubes)